The “SHITAL “ make PVC Cable Tray, supports & other described in this brochure provide a very economical and completely non-corrodible system for cable installations. 

Characteristics  of “SHITAL” make PVC cable Trays:
MOC  = PVC 
Range Width  = 50 mm to 500 mm.
Flange Height  = 25 to 100 mm.
Standard Length  = 3 Meters.

Features:
Chemical Resistance
Unaffected by most acids, alkalis and most commonly used chemicals such as ammonia, petrol, hydrogen, potassium chlorate, phosphorous, soap, sodium, sulphate etc.

Linear Expansion 
1/10,000th unit per degree C. Based upon this constant temperature rise of 42 degrees C would increase the length of a 3 meter (9.8 ft) Tray by 12.7 mm(0.5”)

Working Temperature 
From -40 C to + 50 C (-40F to + 122F)

Flammability 
Self extinguishing and non – inflammable for all practical purposes.

Workability 
Can be cut with ordinary saw. Light to handle. (Specific gravity 1.4) Holes cab be drilled with ordinary hand drills. No sharp edges are left after cutting. 

Weathering 
Unaffected by sunlight (Ultra – violet) or water and in use compares favorable with all alternatives.

Jointing of Trays
Each end of tray is socket ed so jointing is easy WITHOUT coupler plate. 

Type available 
PERFORATED & LADDER Type.

Normally not required as all accessories cab be fabricated from cable tray at site by simple hacksaw cutting & bending at room temperature. If need be horizontal fitting like Reducer, Bend T and cross (4 way) can be supplied. SHITAL make PVC Cable Trays Accessories are manufactured in "One Piece Moulding.

Used for supporting rigid PVC cable tray or directly laying/supporting cables. Molded from PVC & suitable up to 300 mm width cable Tray.
 
COST  FACTOR:
Quite comparable with GI Perforated cable tray up to 300 mm width, but slightly expensive comparing with GI ladder type trays.
BUT considering the rising Metal prizes and  No Maintenance cost for fairly  long time, these trays are economical.
 
We are sure with changing work culture of preventative maintenance use of “SHITAL” make PVC cable Trays is the right answer.

We are pleased to introduce ourselves as manufactures of “Shital” make protection guards in semi – moulded HDPE & one piece moulded polyester + CSM / Fibre Reinforced Plastic (FRP) mainly used for protection of all types of electric motors. Supreme Electroplast Industries, was the first company in India to introduces FRP Protection guard / FRP Electric Motor Fan covers before 20years and are still the pioneer in this products. 

Range: FRP canopies are available for all types, makes of motors both for horizontal (B 3 mounting) and vertical (V 1) mounting . Frame size 71 M to 630 M and also for HT/LT motors. 

Outdoor weathering: FRP motor guards are not affected by ultra violet rays of sunlight on prolong outdoor use.

Durability and handling of FRP motor guard: This Guards are light in weight, easy to handle and not affected by any corrosive chemicals nor heavy rains Shital make FRP guards are suitable for all kinds of industries.

Cost: At the cost of ONE burning point of motor, this guards provide maximum protection for a prolonged period without any recurring expenses. FRP motor guards are manufactured in 70 different sizes to suit individuals requirements.

Conclusion: Shital make FRP guards are maintenance free product and in practice one calls such a thing “Indestructible” Shital canopies help in achieving full working life of motors/Pumps.

It has been a general practice of providing some short of protection to electric motors, the most common being from MS or GI sheets. Due to prevailing corrosion, MS/GI guards needs periodical painting but again it has limited life. MS/GI guards are heavy too, compared to plastic guards. Following are the some types of Electric Motor Cover.

Type-R
Suitable for any make of horizontal foot mounted motor having terminal box on Right or Left while viewing from the driving end.

Type-A
Suitable for any make of horizontal foot mounted motor having terminal box on TOP while viewing from the driving end.

A. Semi-moulded HDPE plastic guard for Electric Motors. Frame size: 71 to 132 S

B. One piece moulded FRP Plastic guard for electric motors. Frame size: 132 to 400M.

C. Guard for Frame size 400 and above will be of half size i.e. upto just above the shaft of the motor. The motor will remain uncovered below the shaft.

Cable Trays are used to support power cables & control cables for indoor & outdoor application.GI/MS cable Trays erode, corrode and spread heat, thus lead to power interruptions. SUPREME FRP cable Trays are safe, durable and cost effective for routing & supporting cables. Manufactured as per NEMA BIS/Consultants specification,SUPREME FRP Cable Trays are available in the following Type :

Ladder Type FRP Cable Trays
Two Longitudinal side rails connected by rungs at regular intervals.

Trough Type FRP Cable Trays
Structures with solid perforated bottom with integral or separate longitudinal side rails.

Channel Type FRP Cable Trays
Structures with a solid or perforated bottom with integral side rails.

Unique Features:

• Excellent weather ability – UV Stabilized
• Fire retardant
• Non – magnetic
• No   corrosion , no chemical erosion
• Maintenance Free
• Light weight
• High Load bearing capacity
• Easy to install
• Suitable for horizontal, vertical layout
• Load bearing capacity

top 

SUPREME FRP cable Tray have bearing capacity similar to G.I / M.S Cable Tray. The Load Bearing capacity complies to NEMA / BIS / consultants requirements and customers needs 

Manufacturing Process
SUPRME FRP sections are manufactured from an advanced formulation of thermosetting polyester resin with fiber glass reinforcement on state of the art – electronically controlled pultrusion plant. SUPREME FRP Cable Trays are fabricated using SUPREME FRP Sections wherever applicable. S.S rivets & S.S hardware are used.  Ready to use prefabricated FRP cable Trays & FRP accessories are supplied in the sizes as per the needs of the customers.

INSTALLATION of SUPREME FRP Cable Trays. Handling 
SUPRME FRP Cable Trays are coming in standard pack of two tray packed one over the other. SUPREME FRP Cable Trays cab be easily carried as head load.

STORAGE 
SUPREME FRP Cable Trays cab be stored indoor or outdoor. FRP cable Trays should be sacked layer by layer in crisscross direction & items of one size should be kept in a stack.

INSTALLATION
SUPREME FRP Cable Trays are suitable for indoor & outdoor use in all climatic conditions. They may be horizontally laid as in a cable channel along with roof beams. Alternatively FRP Cable Tray may be vertically laid along walls or on structure. The cable Trays should be supported on M S wall bracket or hanger. Separate support should be provided for accessories like elbows, tees cross joints etc. Maximum span between supports should be 2.0 Meters to limit deflection. 

For installation, pick one pack of SUPREME FRP Cable Trays, hoist/locate on support structure, open the packing and shift top tray to its location and joint  both the trays with coupler plate. 

FRP is made up of high tensile fiberglass which having great strength. Fiberglass Grating that is frp grating are very common in Country like India. To know more contact us.

Description / Specification of F.R.P. Push Button Cover

We are involved in offering a wide range of F.R.P. Push Button Cover to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  F.R.P. Push Button Cover. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Tube Light Fittings

We are involved in offering a wide range of Tube Light Fittings to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Tube Light Fittings. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Egg Belts are available in the following Types :

Perforated Polypropylene Plastic Egg belt: 

Plastic conveyor Egg belt

PP plastic Egg belt.


Features:

• Colour : white
• 60 mil (1.5mm ) thick Polypropylene (PP) plastic
• Belt has square holes allowing 4 small contact to egg and does not allow dust to settle on belt.
• With the help of belt, clear eggs with less cracks are produced
• Available in standard length of 510 feet, 610 feet, 1020 feet and 1220 feet's and in width 8" (200mm) and 10" (250mm)
• Egg belt can be manufactured in customized width, length, thickness and color.